For Successful Fudge Every Time | RICARDO (2024)

Fudge is one of those must-have holiday treats. Everyone has a favourite recipe: Aunt Lucille makes her fudge in the microwave, Grandma adds maple extract and, why not, Ricardo adds white chocolate to his!

Despite every conceivable alternative, the preparation method must pass through the same three unavoidable steps: ingredients are cooked on the stove or in the microwave, cooled and stirred. And, voilà, fudge! Sounds simple, doesn't it? So why does fudge turn out smooth and creamy sometimes, and hard and grainy other times? Follow us to better understand the steps to making perfect fudge.

Cook until the correct temperature

You have to control two temperatures to make successful fudge: the cooking temperature AND the temperature at which the mixture cools before stirring to make it crystallize.

Confectionery experiments have shown that the ideal cooking temperature for fudge is around 114 to 115 °C (237 to 239 °F). The cooking is intended to evaporate a part of the liquid and concentrate the sugar. The temperature of the cream/sugar mixture (called syrup) rises as water evaporates. At a cooking temperature of 114 to 115 °C (237 to 239 °F), there is just enough water left in the syrup to ensure it is not too hard or too soft.

Too cooked

This fudge was cooked to a temperature of 118 °C (244 °F). At this temperature, the sugar is too concentrated and there is not enough water left to form syrup around sugar crystals. The result is hard and brittle fudge. To save the fudge, put it in a saucepan with 45 to 60 ml (3 or 4 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil without stirring until the thermometer reaches 114 to 115 °C (237 to 239 °F).

Undercooked

This fudge was cooked until the temperature reached only108 °C (226 °F). At this temperature, the sugar is not concentrated enough... there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

Cool before stirring

After cooking, the mixture must cool before being stirred in order to make it crystallize. This cooling period is essential: this is what determines the size of sugar crystals which, remember, should be as tiny as possible. Ideally, the syrup should cool to a temperature of around 43 to 50 °C (110 to 122 °F).

Beating before cooling

This fudge was beaten immediately after cooking, while it was still very hot. Its crystals are so big that it has practically reverted back to a sugar state! What happened? Beating the syrup caused the formation of crystallization nuclei, anchor points to which sugar molecules attach to form crystals. Few crystallization nuclei will form in syrup that is still hot, and sugar molecules will readily attach to them. The crystals grow so easily, and the result is really grainy fudge. Better to toss it and start all over!

Beating after cooling

This fudge cooled until it reached 43 to 45 °C (109 to 113 °F) before being beaten. It has a smooth and creamy texture, just how we like it. Here's why: syrup becomes quite viscous (thick) while cooling, and this slows the movement of sugar molecules. When you start to beat it, billions of crystallization nuclei suddenly form, but the crystals stay tiny as sugar molecules have a hard time sticking together.

Sugar crystals

Fudge is a crystalline confectionery, due to the fact that it contains sugar crystals. The smaller the crystals, the less we perceive it on the tongue, the smoother and creamier it is in the mouth. As is the case with many sweets, making fudge is all about the details and seemingly simple steps (see "Our tips to making successful fudge"), which have a major impact on the final result. The better you control the size and growth of crystals, the greater the chance the fudge will succeed. And it all begins first and foremost with temperature control.

How to check the temperature?

You should ideally check the temperature with a candy thermometer or probe left in the saucepan throughout cooking. You don't have a thermometer? You can always do the 'cold water test': drop a small amount of hot syrup in a glass of cold water. As it falls to the bottom of the glass, the syrup cools and forms into a ball. Remove the ball from the water and check its consistency with your fingers. For perfect fudge, the syrup should form a soft ball that can be picked up, but easily flattened. If the syrup is undercooked, drops of syrup will sink to the bottom of the glass in threads or simply dissolve. If the syrup is overcooked, the ball will be hard and difficult to flatten with your fingers. Repeat the test every two or three minutes until you obtain the desired consistency. Use a clean spoon every time you scoop up a bit of syrup.

Our tips to making successful fudge

1 › Calibrate your thermometer
To do this, boil water and take its temperature with the thermometer. It should read 100 °C (212 °F). If it doesn't, take the difference into account during cooking.

2 › Make sure sugar crystals are dissolved at the start of the cooking
Start cooking over low heat and stir until the sugar is completely dissolved. Don't stir for the rest of the cooking.

3 › Pay attention
The syrup temperature rises slowly at first, but a lot faster after 104 °C (220 °F). Don't get distracted! One or two degrees can make all the difference.

4 › Allow to cool without stirring
The syrup can cool down slowly, by staying in the saucepan at room temperature, or you can speed up the process by putting the saucepan in a sink filled with cold water. Don't use ice water. Syrup at the saucepan's edges will cool too quickly while the centre remains too hot.

5 › When the mixture cools, beat it continually
… until it starts to crystallize. If you beat it by hand with a wooden spoon, crystallization can take between 5 to 15 minutes. The process is much faster with an electric mixer, just 2 to 3 minutes. The mixture is ready to be poured into a pan when it has visibly thickened and lost a bit of its luster.

For Successful Fudge Every Time | RICARDO (2024)

FAQs

What is the secret to perfect fudge? ›

Valuable tips for successful fudge
  • Don't stir during cooking. Fudge can be cooked on the stove or in the microwave. ...
  • Avoid crystallization. During cooking, sugar crystals can stick to the sides of the pan. ...
  • Let cool before beating. After being cooked, the sugar must crystallize again to create fudge. ...
  • Beat the mixture.

What is the softball test for fudge? ›

According to most recipes, the ingredients of fudge are cooked to what is termed in kitchen parlance the soft ball stage, that point between 234 and 240 °F (112 and 115 °C) at which a small ball of the candy dropped in ice water neither disintegrates nor flattens when picked up with the fingers.

How long should I beat fudge for? ›

Directions. Bring brown sugar, butter, and evaporated milk to a boil in a large saucepan; boil mixture for 10 minutes. Remove from the heat and add confectioners' sugar; beat with an electric mixer on medium speed for 5 minutes.

What is the key to successful non grainy fudge? ›

The key to successful, nongrainy fudge is in the cooling, not the cooking. The recipe calls for heating the ingredients to the soft-ball stage, or 234° F, then allowing it to cool undisturbed to approximately 110° F.

Why is my 3 ingredient fudge not setting? ›

Why won't my 3 ingredient fudge set? This often happens when the condensed milk and chocolate chip mixture isn't hot enough to start. Everything must be completely melted before it is transferred to the pan to cool.

Should you stir fudge while it's cooking? ›

Don't stir!

Once the fudge reaches soft-ball stage on the candy thermometer, remove from the heat and let the temperature drop to 110°F. Keep that spoon or spatula out of the pot until this happens. If you stir too early in the process, you'll make the sugar crystals too big and end up with grainy fudge.

How to test fudge without a thermometer? ›

To test the boiling mixture for doneness, drop a bit of it into a bowl of cold water. If it forms a ball that is soft enough to flatten between your fingers, the mixture is ready for cooling. When the fudge cools to 110 degrees F/43 degrees C, beat the mixture vigorously with a wooden spoon until it's no longer glossy.

Why did my fudge come out like taffy? ›

Fudge usually behaves this way when it's not cooked to a high enough temperature (due to oversight or a faulty candy thermometer).

Why is my fudge too soft? ›

Too Soft or Too Hard Fudge

The amount of time you cook fudge directly affects its firmness. Too little time and the water won't evaporate, causing the fudge to be soft. Conversely, cook it too long and fudge won't contain enough water, making it hard with a dry, crumbly texture.

What happens if you beat fudge too early? ›

Beating the syrup caused the formation of crystallization nuclei, anchor points to which sugar molecules attach to form crystals. Few crystallization nuclei will form in syrup that is still hot, and sugar molecules will readily attach to them. The crystals grow so easily, and the result is really grainy fudge.

What to do with failed fudge? ›

Options for what you can do with your unset fudge:

OPTION 1) Depending on how runny it is, you can either use it as a frosting for cakes, or a sauce for ice-cream. OPTION 2) Freeze it overnight. Cut it into squares. Cover each square thickly in melted chocolate, ensuring no part of the fudge is exposed.

How long do you boil fudge to get to soft ball stage? ›

How long does it take to make fudge:
  1. about 18 min to reach boiling.
  2. about 40 minutes to reach soft ball stage.
  3. 60 minutes to cool.
  4. 28 minutes to beat in a KitchenAid (your time for this may vary)
  5. 4 hours to set.

How do you make fudge creamy and not grainy? ›

It's not brittle or crumbly, at least not unpleasantly so. By cooling the fudge prior to agitation (like in the recipes included in this article), on the other hand, you'll get much smaller, finer sugar crystals and a finished fudge with a smooth, creamy texture.

Why does my fudge look oily? ›

The Science Of Oily Fudge

If your fudge is heated too much during the mixing process, or if the ingredients are insufficiently mixed together, the butter fat will separate itself from the liquids in the mix and rise to the top of the fudge, forming greasy pools.

How do you make fudge more solid? ›

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

How to make fudge more solid? ›

How do you fix fudge that is too soft? Bring the fudge back to a boil with 1–2 US tbsp (15–30 ml) of cream. If your fudge is soft or runny, it probably didn't come up to a high enough temperature while it was cooking. Put it back into the saucepan and add 1–2 US tbsp (15–30 ml) of 35% fat whipping cream.

Why hasn't my fudge set properly? ›

The main reason is that your Fudge has not reached the optimum temperature. If your mixture only reaches 110 or 112 degrees Celsius it will always be soft. That's why we recommend investing in a sugar thermometer. Another reason your Fudge is not setting is that the ratio of liquid to sugar is too high.

What ingredient makes fudge hard? ›

Too cooked

This fudge was cooked to a temperature of 118 °C (244 °F). At this temperature, the sugar is too concentrated and there is not enough water left to form syrup around sugar crystals. The result is hard and brittle fudge.

What does cream of tartar do in fudge? ›

Cream of tartar is used in caramel sauces and fudge to help prevent the sugar from crystallizing while cooking. It also prevents cooling sugars from forming brittle crystals, this is why it's the secret ingredient in snickerdoodles!

References

Top Articles
Latest Posts
Article information

Author: Francesca Jacobs Ret

Last Updated:

Views: 6339

Rating: 4.8 / 5 (68 voted)

Reviews: 91% of readers found this page helpful

Author information

Name: Francesca Jacobs Ret

Birthday: 1996-12-09

Address: Apt. 141 1406 Mitch Summit, New Teganshire, UT 82655-0699

Phone: +2296092334654

Job: Technology Architect

Hobby: Snowboarding, Scouting, Foreign language learning, Dowsing, Baton twirling, Sculpting, Cabaret

Introduction: My name is Francesca Jacobs Ret, I am a innocent, super, beautiful, charming, lucky, gentle, clever person who loves writing and wants to share my knowledge and understanding with you.