Parts for GE WHDRR418E3WW: Suspension, Pump & Drive Components Parts (2024)

(963)

Watch Video

(25)

(1)

The GE Suspension Rod and Spring Assembly is an OEM replacement part for GE washing machines. Its primary function is to provide support and stability to the tub during the wash and spin cycles. The assembly typically consists of four suspension rods, each equipped with a spring, which work together to absorb vibrations and prevent excessive movement of the tub. The GE Suspension Rod and Spring Assembly can also be used on Hotpoint, Kenmore, and RCA washers.

This part fixes the following symptoms:

• Excessive shaking or bouncing of the washing machine during the wash and spin cycles
• Unusual loud noises or banging sounds during operation
• The washing machine tilting or leaning to one side
• Uneven distribution of the laundry load inside the drum
• Leaks or water overflow due to unstable movement
• Error codes or warning messages on the machine's display related to imbalance issues

Watch Video

(11)

The Suspension Rod & Spring Assembly is an OEM part for GE washing machines. It is a component that helps support and stabilize the drum during the wash and spin cycles. The suspension rod and spring assembly work together to absorb vibrations and maintain proper balance, ensuring smooth and efficient operation of the washer.

A bad suspension rod can be caused by various factors. Over time, the rods or springs may wear out, become weak, or break due to continuous use and the constant movement of the drum. Heavy loads or excessive vibration can also contribute to the degradation of the suspension assembly.

Symptoms of a bad suspension rod and spring include excessive shaking or bouncing of the drum during operation, loud banging noises, or the washer not spinning properly. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Watch Video

(12)

(963)

The GE suspension rod support is an OEM replacement part responsible for stabilizing and supporting the drum or tub of a washing machine. This part is located inside the washer's cabinet at the bottom of the tub to connect to the suspension rods. These rods suspend the drum, allowing it to move and vibrate during the wash and spin cycles while minimizing excessive movement that could potentially damage the machine or cause noise and imbalance issues. The support helps ensure that the washing machine operates smoothly and efficiently by absorbing vibrations.

This part fixes the following symptoms

• Excessive vibration and shaking.
• Loud banging during the wash or spin cycles.
• Visible damage on the suspension rod support.

Watch Video

(7)

The Drive Belt is an OEM part for GE washing machines. It functions as a critical component that connects the motor to the drum, transferring power from the motor, which in turn allows the drum to spin during the wash cycle. Made from rubber reinforced with fibers, this belt is designed to withstand the stress of spinning and agitating motions.

Symptoms of a bad Drive Belt include:

• The washing machine drum not spinning,
• A squealing or screeching sound when the washer is running,
• Visible fraying, glazing, or signs of wear on the belt,
• The belt slipping off the motor or drum pulley.

Causes of drive belt failure typically include regular wear and tear from use, overloading of the washer which puts extra strain on the belt, or exposure to oils and other substances that can degrade the rubber.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Watch Video

(80)

The Drain Pump is an OEM part for GE washing machines. It is responsible for removing water from the washer's tub at the end of each wash cycle, ensuring that your laundry is properly drained before the spin cycle. This pump helps to prevent water from sitting in the tub, which can lead to mold and mildew.

Symptoms of a bad Drain Pump include:

• Water not draining out of the washer, leading to stagnant water pooling in the tub.
• Unusual noises during the drain cycle, indicating a struggle or failure to operate.
• The washing machine stopping abruptly before or during the drain phase.

Causes of a bad drain pump can include blockages from small garments or debris, mechanical failure from wear and tear, or electrical issues that affect the pump's power supply.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Watch Video

(198)

(963)