Wet Brining Vs Dry Brining - Learn to Smoke Meat with Jeff Phillips (2024)

Smoking-Meat.com is supported by its readers. We may earn an affiliate commission at no extra cost to you if you buy through a link on this page.

Read this article without ads

Join Now

In this article we'll talk about wet brining vs dry brining and how that all works in a “sciency” sort of way without making it overly complicated.

Let's define the two types of brining:

Wet Brining– soaking meat, chicken, fish, etc. in a solution of salt and liquid and possibly other less-essential ingredients to add flavor and more moisture. This solution is made up of a ratio of 1 gallon of liquid (usually water) and 1 cup of kosher salt.
Dry Brining– Applying salt to the surface of meats to add flavor to the inside and to help lock in the moisture that is already present. Kosher salt is usually added at a rate of ½ to 3/4 teaspoon per pound of meat

It's easy to understand that adding salt to meat whether it's part of a solution or added directly to the meat will add flavor to that meat. Salt has been used in various forms for as long as the world has been around to flavor food and make meat, leaves, vegetables, roots, etc. taste better.

And, of course, salt has also been used as well for preservation of foods, especially before the advent of modern refrigeration, but that is fodder for a separate article.

In my experience, wet brining works best on leaner, more delicate meat such as poultry, fish and seafood. Dry brining works best for fattier and more robust cuts such as beef, pork, and lamb. This would also include wild game such as deer, elk, etc.

The caveat might be poultry with skin since these are bad about ending up rubbery when cooking at low and slow temperatures.. the extra water just doesn't help that situation. To combat this, you can use dry brining methods or let the poultry spend some time in the fridge drying AFTER you brine it and BEFORE you smoke it.

Both wet brining and dry brining are somewhat interchangeable though and can be used on any type of meat depending on your desired result and only practice will tell you which you will prefer on various types of meat.

How Brining Works

Let's talk about how brining works viadenaturing..

Denaturing is what happens when salt comes into contact with meat. The salt causes the protein strands in the meat to unwind. When this happens, moisture gets caught between these strands. After a while the protein strands change their structure, tangle with one another and the moisture is trapped inside.

Why is this important? Because during the cooking process, moisture is forced out of the meat. With all of that extra moisture trapped inside the protein strands, the moisture is not forced out quite as easily.

In wet brining tests, pieces of meat such as chickens or turkeys will gain weight during the wet brining process. When cooked side by side with non-brined pieces that are of a similar size and weight, the brined test subjects will end up heavier than the non-brined subjects.

This extra weight is water that got trapped and the heat was not able to force it out of the meat during the cooking process. This means it's extra juicy when you cut into it.

We don't have to use science to know this. Brined turkeys, chickens, etc. are noticeably more juicy than ones that have not been brined. The science just proves what we already knew was happening.

While we are on the subject of wet brining, be sure to use glass, stainless steel or plastic to do your brining.. in essence, non-reactive containers. If you happen to use a zip top bag, do yourself a favor and just set it down in a large bowl or pot before placing it in the fridge in case of leakage.

The Wet Brining Process

To make a wet brine, add 1 gallon of liquid to a plastic, glass or stainless steel container. Add your salt and stir for a minute or two until the salt dissolves. If you're using water, it will return to clear letting you know that the salt is dissolved.

What about adding sugar and other ingredients to the brine?

Lots of folks add sugar to the brines and I've been known to do it myself from time to time. It doesn't really help the brine process in my opinion but it does add a little something to the flavor and can even help the browning on the outside of the meat. I prefer brown sugar but you can use white sugar, turbinado, or other sweeteners like maple syrup, honey, etc.

Other ingredients such as beer, herbs, spices, hot sauce, flavorings, etc. can be added at will. There is some science that says these things don't penetrate deep into the meat like the saltwater does but it does influence the flavor and I highly encourage experimentation in that regard.

Be sure to write down what you add then if it turns out amazing, you can repeat it.If it turns out not so good, you have a starting place for modifying the recipe to make it better next time.

If you want to see a few wet brine recipes that I use for poultry, check them out here. These also work for fish and seafood.

Types of Salt

You keep seeing the word Morton's coarse “kosher salt” in this article and in all of my brine recipes and if you're not familiar with that, it's just a coarse type of salt that I use for brining because it has large flakes and dissolves easily without heat.

I also use it in most of my other cooking as well but for a different reason, because Morton's coarse kosher salt is flaked, it sticks to foods a lot better than other kosher salts which are more granular.

It is important that you use the correct ratio of salt to liquid so if you do decide to use a different type or brand of salt, make sure you measure by weight instead of volume. You are looking for 230 grams of salt.

Wet Brining Vs Dry Brining - Learn to Smoke Meat with Jeff Phillips (1)

This is not as important in small amounts but once you start using a cup at a time for brining, it's necessary because of the varying density between brands and types of salts.

For example: 1 cup of table salt weighs about 288 grams while 1 cup of Morton's coarse kosher salt weights 230 grams. Huge difference there and it just has to do with the size of the granules and how closely packed together they are.

Table salt has tiny granules and they pack together tightly. This is why you can fit so much more table salt in a given space than kosher salt which is made up of larger flakes that have a lot of space between each piece.

I have been using 1 gallon of liquid with 1 cup of Morton's coarse kosher salt in my brine recipes for decades and it just works perfectly every single time. If you're using a different type of salt, that's ok just make sure to measure it by weight instead of volume when making your brines.

For all brine recipe, I recommend using 1 gallon of water with 230 grams of salt (preferably Morton's coarse kosher salt) but other salts will work as long as the weight is correct.

Need to double the recipe? Still works the same, just double the liquid and double the weight of the salt.

The Dry Brining Process

Unlike wet brining poultry, the salt is added directly to the meat. We're not adding extra moisture to the steaks during the dry brining process but that doesn't mean it doesn't end up more juicy.

Salt is added to the top of steak, chops, etc. at a rate of ~½ teaspoon per pound of meat. I often go a little higher than this and use closer to ~¾ teaspoon per pound although I don't generally measure. Once you've been doing this for a long time you start to get a little intuition about how much salt to use.

Here' the coverage that I generally use using Morton's coarse kosher salt.

Wet Brining Vs Dry Brining - Learn to Smoke Meat with Jeff Phillips (2)

After just a few minutes, the salt begins to pull moisture to the surface of the meat.

Wet Brining Vs Dry Brining - Learn to Smoke Meat with Jeff Phillips (3)

That moisture dissolves the salt and becomes a salty solution (it makes its own brine in essence).

Here's that same steak after only 1 hour. Most of the salt is dissolved and the top of the steak has puddles of brine all over it.

Wet Brining Vs Dry Brining - Learn to Smoke Meat with Jeff Phillips (4)

Eventually that salty brine gets reabsorbed back into the meat. This entire process happens over the course of a few hours.

The salt from that brine then causes this same denaturing process to happen in the steak and that reabsorbed moisture gets trapped between the protein strands.

During cooking, just like a chicken or turkey, a dry brined steak ends up with more retained moisture in the end than a non-dry brined steak due to the trapped water that cannot be forced out easily.

Pretty cool, eh?

You may have noticed that I placed the steaks on a rack inside of a pan. I do this to allow air to flow all the way around the steaks while they dry brine and often I will just cook them on that same setup to allow the smoke good access all the way around as well.

Seasoning the Steaks During Dry Brining

Want to season the steaks as well as dry brine? No problem as long as your rub or seasoning is very low on salt. I often use my original rub and/or Texas style rubduring the dry brining process since they are very low on salt. Back in the day, I use to do this as two separate processes where I would dry brine first and then season right before the meat went on the smoker but nowadays, I do the dry brine and seasoning at around the same time and get equally great results.

The perfect scenario is to salt the meat and wait about 5-10 minutes for the juices to start coming to the surface. Now you can add your seasoning to the meat and it will stick to the surface with no need for a binder such as oil, mustard, etc.

Wet Brining Vs Dry Brining - Learn to Smoke Meat with Jeff Phillips (5)

One Side or Both Sides?

Often I will dry brine both sides of a thick steak (¾ inches thick or more) but it does require a little more hands-on time.

Dry brine the first side, place it in the fridge for 2-4 hours then remove and dry brine the 2nd side or another 2-4 hours or overnight. When you do this use a lighter coverage than you do when you're only doing one sided. This will ensure that both sides of the steaks or chops end up equally juicy and flavorful.

I have not done a side-by-side test on “one side” vs. “both sides” on thick steaks but it is something that seems to work well for me.

Which is Best? Wet Brining or Dry Brining?

That is not a question that can be answered directly however, each of these methods have properties which will help you decide which is best for the type of meat you are wanting to cook.

Dry Brining:

Best for fattier cuts such as brisket, pork butt, etc. as well as all steaks regardless of fat content.
Does not add extra moisture to the meat.
Less messy
Saltiness not as uniform as in wet brining.

Wet Brining:

Best for thinner, leaner cuts such as pork loin, chicken breast, fish, etc with the exception of poultry with skin which is best dry brined.
Messier than dry brining
More uniform salting than in dry brining.
Adds extra moisture to the meat.

Have questions or comments about this article on wet brining vs. dry brining? Post them below.