Pork Cooking Temperature — How To Know When Pork Is Done (2024)

Pork Cooking Temperature — How To Know When Pork Is Done (1)

Dec 27, 2022 / MIN READ

When it comes to getting comfortable in your home kitchen, there’s nothing better than serving a perfectly cooked piece of pork. Whether or not you have attempted this yet, the task of finding the perfect temperature and time to cook meat can seem overwhelming, especially for newer chefs. Luckily, it’s not as complicated as you might first think.

Don’t let your uncertainty hold you back from experiencing the deliciousness that is a pork loin, pulled pork or a pork chop with your meal. Read on and get ready to wow any future dinner guests with a gorgeous dinner, made all the better with that juicy piece of protein.

At what temperature is pork done?

One of the most important things to note when cooking meat is temperature. Before serving any kind of meat, you should make sure that the internal temperature meets the safety standards set by the United States Department of Agriculture and the National Pork Board. This may sound a little daunting initially, but cooking pork safely is as simple as obtaining a thermometer. The temperature is applicable to every pork cut including:

See Also
AskUSDA

  • Pork butt
  • Pork shoulder
  • Pork ribs
  • Ground pork
  • Loin chops

Keep in mind that most fresh pork products are leaner than other types of meat you might be familiar with. Because of this, the USDA suggests cooking it to an internal temperature of 145 degrees Fahrenheit. This is the same temperature for every variation of pork you might choose from pork tenderloin to shoulder. However, once your meat has hit this mark, you’re not too far off from overcooking the product. As an at-home chef, that means you’ll need to keep a close eye on the process to create a perfectly cooked piece of pork.

How to know when your pork is done

Okay, so now you know the ideal temperature to hit in order to make your pork safe to eat. But how do you know when the meat is ready to be taken off the heat and ready to be served? Your best friend in this case will be a food thermometer, a tool that will determine the internal temperature of your piece of meat. Here are simple directions for you to use a meat thermometer:

  1. Test: You’ll want to make sure that your thermometer is accurate and reliable. You can do this by putting it in some cold water and waiting for the dial to drop.
  2. Place: Ensure that you put the thermometer in the pork roast in the right place. Place the thermometer into the thickest part of the meat to receive an accurate reading. Be sure to do your best to avoid fat or bone.
  3. Read: Now, your thermometer should be giving you a temperature. It’s best to begin testing your meat early so you don’t burn or overcook the pork.

Once the meat has been cooked until the internal temperature reaches 145 degrees Fahrenheit, you’re free to adjust the cooking time depending on your preference. Do you prefer a little more juiciness? You might want to pull it from the heat soon after. On the other hand, there are some people who love a well-done piece of meat. In that case, cooking it a little longer would be the best move.

Pork Cooking Temperature — How To Know When Pork Is Done (2)How to know when your pork is done.

Is it okay for pork to be pink?

Keep in mind that, when it comes to pork, a little bit of pink color is normal for a fully cooked piece of meat. You can even serve up some medium rare pork to those who prefer to eat it that way. If you’re still unsure, just grab your handy-dandy meat thermometer and check according to these guidelines (in Fahrenheit):

  • Medium-rare: 145 to 150 degrees
  • Medium: 150 to 155 degrees
  • Medium-well: 155 to 160 degrees
  • Well: 160 degrees

Another good tip is to keep an eye on the juices of the meat as you’re preparing it. If the liquid is clear, the meat is probably fully cooked. A little pinkness to the pork will leave the meat juicy and tender, as long as it has hit that ideal 145 degrees Fahrenheit. However, if you are uncomfortable with this color, you can cook it for a few minutes longer to eliminate the shade.

Upgrade your mealtime with pork from Hatfield®

Now you’re ready to get creative and find a new pork recipe to test out at your next dinner party. Nothing will guide you in the right direction like using top-tier pork products, like the ones you can find from Hatfield®.

We’re dedicated to providing you with the best pork possible. Not only that but when you buy from Hatfield®, you can rest easy knowing that we work every day to do business the right way. From the treatment of the animals and farmers to the environment, our team pledges to take great care from the beginning to the end of the process.

Are you ready to get in the kitchen and cook some yummy pork for your next meal? Find out where you can buy Hatfield®products in a store near you.

Pork Cooking Temperature — How To Know When Pork Is Done (2024)

FAQs

Pork Cooking Temperature — How To Know When Pork Is Done? ›

Cook all raw pork steaks, chops, and roasts to a minimum internal temperature of 145°F (62.8 °C) as measured with a food thermometer before removing meat from the heat source. For safety and quality, allow meat to rest for at least three minutes before carving or consuming.

How to know when pork is fully cooked? ›

With a Thermometer

Digital and analog meat thermometers have become more common in the home, and with good reason. The USDA, as of 2020, recommends that pork becomes safe to eat when it reaches an internal temperate of 145°F and, importantly, rests for three minutes before eating.

Is pork done at 145 or 160? ›

Because of this, the USDA suggests cooking it to an internal temperature of 145 degrees Fahrenheit. This is the same temperature for every variation of pork you might choose from pork tenderloin to shoulder.

How can you tell if pork is done if you don t have a thermometer? ›

One way to determine your porks' doneness is by the color of the juices that come out of it when you poke a hole in it with a knife or fork. If the juices run clear or are very faintly pink, the pork is done cooking. If they're mostly or entirely pink or red, it's best to continue cooking.

Is a little pink in pork ok? ›

If fresh pork has reached 145°F (62.8 °C) throughout, even though it may still be pink in the center, it should be safe. The pink color can be due to the cooking method or added ingredients.

How long does pork take to cook? ›

Pre-heat oven to 325F (163C). Bake pork roast in the oven UNCOVERED for approximately 25-30 MINUTES *PER POUND* (55-66 MINUTES PER KILOGRAM) Or until internal temperature reaches 155F (68C), rested to a final 160F (71C).

What temperature to cook pork in the oven? ›

Preheat the oven to 375 degrees F (190 degrees C). Sprinkle pork chops on all sides with thyme, salt, and pepper. Place on a baking sheet. Bake in the preheated oven until an instant-read thermometer inserted into the thickest part of a pork chop reads 145 degrees F (63 degrees C), about 20 minutes.

What are the chances of getting sick from undercooked pork? ›

We are talking about 0.0000036%, less than any known rare disease.

Why does my meat thermometer say 170 for pork? ›

This is because while it is safe to consume these cuts once cooked to 145°F, pork shoulder won't be soft enough to shred for pulled pork sandwiches at that temperature, and ribs won't be tender either. It's best to cook these cuts of meat to at least 170°F, but not beyond 210°F to avoid drying them out.

Is pork done at 180 degrees? ›

Cooking pork thoroughly can eliminate the risk of infection. The meat should be cooked to temperatures of 145–160°F (63–71°C) and allowed to rest for at least 3 minutes before eating.

What color should pork be when fully cooked? ›

Table 1 – Internal Color of Cooked Pork Loin Chops
Pork QualityEndpoint Temperature and Time at that Temperature
145°F (63°C), 3min170°F (77°C), 1sec
NormalPinkTan/White
Normal-injectedPinkTan/White
PSESlightly PinkTan/White
1 more row

Is it OK if pork isn't fully cooked? ›

Rare pork is undercooked. Both uncooked or raw pork and undercooked pork are unsafe to eat. Meat sometimes has bacteria and parasites that can make you sick. Thorough cooking kills any germs that might be present.

Does pork need to be 100% cooked? ›

Cooking pork thoroughly can eliminate the risk of infection. The meat should be cooked to temperatures of 145–160°F (63–71°C) and allowed to rest for at least 3 minutes before eating.

What does fully cooked pork look like inside? ›

Color-wise, the slogan worked because pork cooked to 160 degrees is a pale, languid white-gray color. In contrast, pork cooked to 145 degrees remains decidedly pink. It's not "bloody" like rare-cooked beef but still, the pork's color can be described only as pink-pink-pink.

References

Top Articles
Latest Posts
Article information

Author: Prof. An Powlowski

Last Updated:

Views: 6782

Rating: 4.3 / 5 (64 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Prof. An Powlowski

Birthday: 1992-09-29

Address: Apt. 994 8891 Orval Hill, Brittnyburgh, AZ 41023-0398

Phone: +26417467956738

Job: District Marketing Strategist

Hobby: Embroidery, Bodybuilding, Motor sports, Amateur radio, Wood carving, Whittling, Air sports

Introduction: My name is Prof. An Powlowski, I am a charming, helpful, attractive, good, graceful, thoughtful, vast person who loves writing and wants to share my knowledge and understanding with you.